Evaluation of noise along selected communication routes of the Upper Silesian agglomeration

  • Jakub Ekert Silesian University of Technology
  • Piotr Czech Silesian University of Technology
  • Tomasz Figlus Silesian University of Technology
  • Katarzyna Turoń Silesian University of Technology
  • Maciej Rozpondek Katowice School of Technology
Keywords: Silesian agglomeration, traffic noise, road noise test, noise studies

Abstract

Due to the constantly growing number of vehicles on the roads and the progressive development of cities, road infrastructure and the construction of new communication routes, noise has become an indispensable element of our lives. It accompanies us practically around the clock and is one of the factors that degrade the environment and is a source of nuisance for people living near roads. The article presents the results of the research on traffic noise occurring in the vicinity of selected communication routes of the Upper Silesian agglomeration.

References

Engel Z., Ochrona środowiska przed drganiami i hałasem, Wyd. Naukowe PWN, Warszawa 2001.

Gołębiowski R., Prognozowanie hałasu samochodowego, Wyd. Naukowe UAM, Poznań 2014.

Grega R., Homišin J., Krajňák J., Urbanský M., Analysis of the impact of flexible couplings on gearbox vibrations, „Scientific Journal of Silesian University of Technology. Series Transport” 2016, vol. 91, p. 43-50. ISSN: 0209-3324, DOI: https://doi.org/10.20858/sjsutst.2016.91.4.

Harachová D., Deformation of the elastic wheel harmonic gearing and its effect on toothing, „Grant journal” 2016, vol. 5, no. 1, p. 89-92, ISSN: 1805-0638.

Homišin J., Kaššay P., Puškár M., Grega R., Krajňák J., Urbanský M., Moravič M., Continuous tuning of ship propulsion system by means of pneumatic tuner of torsional oscillation, „International Journal of Maritime Engineering: Transactions of The Royal Institution of Naval Architects” 2016, vol. 158, no. Part A3, p. A231-A238, ISSN: 1479-8751.

Kaššay P., Homišin J., Urbanský M., Grega R., Transient torsional analysis of a belt conveyor drive with pneumatic flexible shaft coupling, “Acta Mechanica et Automatica” 2017, vol. 11, p. 69-72. DOI: 10.1515/ama-2017-0011.

Kaššay P., Urbanský M., Torsional natural frequency tuning by means of pneumatic flexible shaft couplings, „Scientific Journal of Silesian University of Technology. Series Transport” 2015, vol. 89, p. 57-60, ISSN: 0209-3324, DOI: https://doi.org/10.20858/sjsutst.2015.89.6.

Kucharski R.J., Hałas drogowy, Wyd. Komunikacji i Łączności, Warszawa 1979.

Mantič M., Kuľka J., Kopas M., Faltinová E., Petróci J., Special device for continuous deceleration of freight cableway trucks, „Scientific Journal of Silesian University of Technology. Series Transport” 2016, vol. 91, p. 89-97, ISSN: 0209-3324, DOI: https://doi.org/10.20858/sjsutst.2016.91.9.

Medvecká-Beňová S., Influence of the face width and length of contact on teeth deformation and teeth stiffness, „Scientific Journal of Silesian University of Technology. Series Transport” 2016, vol. 91, p. 99-106, ISSN: 0209-3324,DOI: https://doi.org/10.20858/sjsutst.2016.91.10.

Nader M., Drgania i hałas w transporcie. Wybrane zagadnienia, Wyd. Oficyna Wydawnicza Politechniki Warszawskiej, Warszawa 2016.

Puskar M., Fabian M., Kadarova J., Blist'an P., Kopas M., Autonomous vehicle with internal combustion drive based on the homogeneous charge compression ignition technology, “International Journal of Advanced Robotic Systems” 2017, vol. 14(5). DOI: 10.1177/1729881417736896.

Rączkowski B., Czynniki szkodliwe i uciążliwe w środowisku pracy – hałas, Wyd. ODDK.PL, Gdańsk 2013.

Rozporządzenie Ministra Środowiska z dnia 14 czerwca 2007 r. w sprawie dopuszczalnych poziomów hałasu w środowisku. Załącznik do obwieszczenia Ministra Środowiska z dnia 15 października 2013 r. (poz. 112).

Tomko T., Puskar M., Fabian M., Boslai R., Procedure for the evaluation of measured data in terms of vibration diagnostics by application of a multidimensional statistical model, „Scientific Journal of Silesian University of Technology. Series Transport” 2016, vol. 91, p. 125-131, ISSN: 0209-3324, DOI: https://doi.org/10.20858/sjsutst.2016.91.13.

Vojtková J., Reduction of contact stresses using involute gears with asymmetric teeth. „Scientific Journal of Silesian University of Technology. Series Transport” 2015, vol. 89, p. 179-185. ISSN: 0209-3324. DOI: 10.20858/sjsutst.2015.89.19.

Zelić A., Zuber N., Šostakov R., Experimental determination of lateral forces caused by bridge crane skewing during travelling, “Eksploatacja i Niezawodnosc – Maintenance and Reliability” 2018, vol. 20(1), p. 90-99. ISSN: 1507-2711.

Zuber N., Bajrić R., Application of artificial neural networks and principal component analysis on vibration signals for automated fault classification of roller element bearings, “Eksploatacja i Niezawodność - Maintenance And Reliability” 2016, vol. 18(2), p. 299-306. DOI: 10.17531/ein.2016.2.19. ISSN: 1507-2711.

Zuber N., Bajrić R., Šostakov R., Gearbox faults identification using vibration signal analysis and artificial intelligence methods, “Eksploatacja i Niezawodność - Maintenance And Reliability” 2014, vol. 16(1), p. 61-35, ISSN: 1507-2711.

Published
2018-09-07
Section
Articles